Compression Springs

Phone: 909.931.0059 - Fax: 909.949.0200

Compression Springs

Compression springs are used to resist applied compression forces or to store energy in the push mode. They may be a straight cylindrical spring, conical, barrel, or hourglass with or without variable spacing between coils. The ends may be opened or closed. Compression springs ends are often ground to increase operational life and to allow the spring to sit square.

1
Type of Material:
If other, please specify here:

2
Wire Diameter:

should be in thousandths of an inch and not a gauge number

3

Outside Diameter:
or

Inside Diameter:

only fill in one of these as the other can be calculated

4
Free Length:

5 Total Coils:

or Pitch:

or Space between coils:

only fill in one of these as the others can be calculated

6 Type of Ends:

7 Finish:

8 Other information that is not required but helpful if known:

the size of the hole it fits into:

the size of the rod it fits over:

the maximum temperature:

the maximum required deflection

9

Quantity Range: to

10
Your Contact Information:

Name

Title

Company

Phone Number

Fax Number

E-Mail Address

Phone (909) 931-0059

Fax (909) 949-0200

Email: sales@centennialspring.com